Ribbon Cable Tester RibbonJoG mkII – Easy to use cable tester to test standard pitch (2.54mm x 2.54mm) ribbon cables in 10,14,16,20,26,34,40,50,60 & 64 pin sizes. The memory is for testing non-standard one to one cables.
Ribbon Cable Tester – 2 Operating Modes
Memory OFF – Plug the ribbon cable in and press the TEST button. If the last connection found matches a standard connector pin count then the cable passes, otherwise the cable has failed with either a short or open circuit.
Memory ON – Test the cable against a special cable configuration held in memory. All 64 pins are checked.
Ribbon Cable Tester – Specifications
Standard 0.1″ or 2.54 X 2.54 mm IDC headers.
Continuity (end to end) less than 4.7KΩ
Short Circuits (end to end) and between connected pins less than 4.7KΩ
Open Circuits (end to end) and between connected pins greater than 10KΩ
Less than 1 Second test time
Min distance between connectors of the same size 130mm
Non-volatile memory feature
Dimensions 290mm * 143mm * 30mm
Uses 4 x AAA batteries (Not included)