The NANE-2C 2 Tools Nano Soldering Station is the best solution for soldering and rework of SMD components requiring the highest precision.
It works simultaneously with two NT115 Nano Hand-pieces.
The short distance from the tip to the handle offers maximum control even when using a microscope. The NANE-C comes with the new Temperature Dynamic Profiles functionality.
The use of these profiles allows you to control the temperature of the component during all the phases of the soldering process, emulating the heating process in a re-flow oven.
Its easy to use menu is configurable in 10 different languages:
The NASE-C Rework Station works with the C115 Cartridge Range.
Temperature- 90 to 450 ºC / 190 to 840 ºF
Dynamic Soldering Profiles – Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC, this new and unique feature allows controlling the heating ramp up rate of the tool to gradually increase the temperature of the component through all the phases of the soldering process. Up to 25 fully configurable soldering profiles can be stored.
Sleep and Hibernation mode – These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Max. and min. temperature: Limit the temperature range in which the operator is allowed to work.
Temperatue levels – Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
Soldering graphics- Real time visualization of tip temperature and power delivered to the solder joint during soldering process.
PIN protection – Keep station parameters protected against unauthorized access.
CONNECTIVITY – USB-B (rear)
Software PC / Trace-ability
USB-A (front) – Firmware update Soldering Graphics management
RS-232 remote control or Smart Fume Extractor connection.
Pedal ( 1 per tool)
Connect a pedal (ref.P-005) to control the tools. It allows using Nano tweezers for soldering.
ESD safe, Tip to ground resistance < 2 ohms. / Tip to ground voltage < 2 mV RMS
Peak power – 14 W per tool – 8.5 V
Voltage (AC) ref. NANE-2C – 230 V
Ambient operating temp. 10 to 40 ºC / 50 to 104 ºF